Tuesday, May 31, 2011

How do i replace the windshield on my 95 honda civic?

its cracked and im gonna get another windshield from the junkyard todayHow do i replace the windshield on my 95 honda civic?
I'm not sure how you'll manage to get the old windshield cleanly off of an old car. Usually there's waterproof-heat resistant adhesive that keeps the glass tightly onto the surface of the frame. I would recommend buying a new windshield with clean edges.



In either case, you'll need a Honda Civic Service manual, adhesive sealers, slid pliers, and need to use 2 suction handles that press against the windshield and allow you to lift the glass. Hopefully, you're strong enough to lift it steady onto place.



You only get one chance to do this right, so practicing on another car in the junkyard might even be a good idea for starters.



Good luck!How do i replace the windshield on my 95 honda civic?
u sure you have 2 go 2 the junk yard? you can take it to a shop or somethn
You can't do that yourself, if it's not done properly it can be a hazard for you or others.



Pay the money to have it installed properly.
I agree.

Pay someone!!
super dangerous to do it yourself
Have a professional do it. Your passenger airbag actually fires off the windshield and if it is not properly installed, will not work as designed.
PLEASE -- PLEASE TAKE THE GOOD ADVICE THAT HAS BEEN GIVEN TO YOU ABOUT TAKING YOUR VEHICLE TO A PROFESSIONAL WINDSHIELD INSTALLATION SHOP!!
when i was a kid i would sit in the seat and push them out with my feet . if it's already cracked you aren't going to hurt it anymore. once you get most of it out you can cut the edge of the sealer more easily. once you have cleaned the lip where you lay the fresh sealer set the new glass in. don't wash for 24 hours and leave your door windows cracked so you don't create pressure when closing the door. you can windshield sealer at most parts houses.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.