Windshield wipers not working and i replace the fuse?

i got a 90 lx mustang that windshield wipers are not working i replace the fuse and still nothing i need suggestions and how to get them to work thank you.Windshield wipers not working and i replace the fuse?
Well you can actually open the hood and the wiper motor is on the firewall. You can try to remove the terminal plugs, clean them really good and try again( A little fine sand paper on the connectors would be a good place to begin). That would be a great place to start.Windshield wipers not working and i replace the fuse?
You need to find the motor underhood. It should be on the firewall, it may be buried under some stuff. There should be two wires going to it. One power, and one ground. You can check for power and ground on these wires with a test light.



If you have power, and ground then the motor is not working and needs to be replaced. If you are missing either power or ground then you need to find out where power/ground are be disrupted.
Either the motor or the switch,needs replacing.