Replacing the windshield washer resevoir on a 2000 Chevrolet Silverado pick-up?

I need to know what has to be removed to get to the resevoir. It is located underneath the battery holder.Replacing the windshield washer resevoir on a 2000 Chevrolet Silverado pick-up?
You will need 8mm -15mm sockets and possibly a phillips screw driver

Disconnect your battery and remove it,

then grab a 14mm socket,(I think dont hold me to that one) and pull out your battery tray.

The resovoir is either held in by a couple (phillips) sheet metal screws or a couple of metric metal screws(10mm or 13mm)

It's a pretty easy swap and if you careful and patient you should have no problems.

One more tip check your battery tray for corrosion and if you see some hit it with a wire brush and shoot some rust inhibiting black (rust-o-leum) paint before putting it back.

Hope this helps, (and I was right about the sizes, LOL)

Good luckReplacing the windshield washer resevoir on a 2000 Chevrolet Silverado pick-up?
remove the battery and the battery tray.